KTI KS-2300 Скачать руководство пользователя страница 70

Страница: 70 / 85

Chapter 6 LEDs Conditions Defined

The Intelligent Switch LEDs provide useful information about the switch and
the status of all individual ports.

LED

STATUS

CONDITION

Power

The Intelligent Switch is receiving power.

*Fault

It will be ON when booting and go OFF when
running. If it is steady ON when running, the
switch is faulty. (*Some models do not have this
LED.)

Port has established a valid link.

Flashing

Data packets being received or sent.

Green

The connection is 100Mbps.

Link / Act

Yellow

The connection is 10Mbps.

The connection is Full Duplex.

FDX /*Col.

Flashing

Packet collisions happen.

Note: For the Fully Modularized Model, the Link/Act LED is green color only.
The speed display (Green:100M/Yellow:10M) is shown on the TX module.

! Important Note :

If there are

100BaseFX

ports on the switch, please

always set the operation speed and operation mode of the 100BaseFX ports
to 100Mbps and full duplex mode. The 100BaseFX ports will fail to work if
they are set to 10Mbps or half duplex or Auto.

Содержание KS-2300






















































































Результаты поиска

Содержание KS-2300

Отзывы:

Похожие инструкции для KS-2300

Бренды по названию

Популярные бренды

KTI KS-2300, Руководство пользователя

Результаты поиска

Содержание KS-2300

Отзывы:

Похожие инструкции для KS-2300

Бренды по названию

Популярные бренды