11/11
5.2 Hot-key operation ( Either PS/2 or USB Keyboard )
The hotkey command examples listed in following sections are based on the
4-Port models. The 2-Port models are equipped with the same design, but 2 PC
selections only.
Note
: If your keyboard does not provide < Scroll Lock > button, use < Caps Lock
> or <Num Lock > as leading key instead.
5.2.1 Leading key Selection
Hot key commands:
[Ctrl] -> [Ctrl] -> [Caps Lock] -> [Enter] to change leading key to [Caps Lock]
[Ctrl] -> [Ctrl] -> [Num Lock] -> [Enter] to change leading key to [Num Lock]
[Ctrl] -> [Ctrl] -> [Scroll Lock] -> [Enter] to change leading key to [Scroll Lock]
Note: The default leading hotkey setting is [Scroll Lock]. After changing the
leading hotkey setting, the new setting will take effect immediately until the
KVM switch is powered off or reset.
5.2.2 PC Selection
Hot key commands:
[Scroll] -> [Scroll] -> [ 1 ] -> [Enter] to select PC1 (not including Audio)
[Scroll] -> [Scroll] -> [ 2 ] -> [Enter] to select PC2 (not including Audio)
[Scroll] -> [Scroll] -> [ 3 ] -> [Enter] to select PC3 (not including Audio)
[Scroll] -> [Scroll] -> [ 4 ] -> [Enter] to select PC4 (not including Audio)
