13/13
5.3 Audio ( Speaker / Microphone ) Selection – only work with Audio model
5.3.1 (PC+Audio) Combination Selection
Hot key commands:
[Scroll] -> [Scroll] -> [F1] -> [Enter] to select PC1 with its Audio
[Scroll] -> [Scroll] -> [F2] -> [Enter] to select PC2 with its Audio
[Scroll] -> [Scroll] -> [F3] -> [Enter] to select PC3 with its Audio
[Scroll] -> [Scroll] -> [F4] -> [Enter] to select PC4 with its Audio
5.3.2 Audio Only ( S Microphone ) Selection
Hot key command:
[Scroll] -> [Scroll] -> [A] -> [Enter] to enable/disable Audio auto-switch mode
Note: One long beep – Audio auto-switch mode is disabled.
Three short beeps – Audio auto-switch mode is enable
Audio Auto-Switch Mode
When this mode is enabled, the hardware push button can select and switch the
PC and the associated Audio at the same time. When disabled, only PC is
switched. This mode has default setting - enabled. Audio means speaker and
microphone signals.
Audio only selection hot key commands:
[Scroll] -> [Scroll] -> [A] -> [1] -> [Enter] to select PC1’s Audio only
[Scroll] -> [Scroll] -> [A] -> [2] -> [Enter] to select PC2’s Audio only
[Scroll] -> [Scroll] -> [A] -> [3] -> [Enter] to select PC3’s Audio only
[Scroll] -> [Scroll] -> [A] -> [4] -> [Enter] to select PC4’s Audio only
