Setting the lower limit for acceptance
After turning on the
power, press the M button
once to set the target
torque range.
Pass/Fail mode display
(With no load applied)
Be sure to not to apply any force to the instrument after turning
it on until the display displays "0". If it is turned ON with some
force applied, it may not indicate the torque correctly.
When you use it in a place where it is exposed to sudden
changes in temperature, turn it OFF and ON frequently.
Check that the mode
indicator is in the state as
shown left. "L" denotes that
the lower limit is being set.
Now you can set a torque
value using the + (Plus)/C
(Clear) and - (Minus) buttons.
After the setting is made,
press and hold the M button
to register the value.
Mode indicator
Mode indicator
If an error code appears,
troubleshoot it referring
to 8.
5.
<<Custom Setting: How to Use the Pass/Fail Mode>>
NOTE
Press the M button to set
the upper limit. Check that
the mode indicator is in
the state as shown left.
"H" denotes that the upper
limit is being set.
Setting the upper limit for acceptance
(2) Setting a target torque