<<Operations in the Preset mode>>
3.
Preset mode display
Setting state
Measuring state
Stays lit in the setting state
Stays off in the measuring state
After 3 seconds
Memory No.
Memory No.
The setting state will turn to the measuring state
with "M" at the upper-left corner of the display
disappearing after three seconds of no operation.
Memory numbers
In the Preset mode, you can preset up to five
torque values storing them into memory numbers 1
through 5.
Every time the M button is
pressed, the next memory
number is called up.
Pressing the M button when the memory No. 5 is
shown returns the display to the Measurement mode.
Memory No. 5
Measurement mode
Memory No. 1
Memory No. 2
Memory No. 3
Memory No. 4
A torque value is registered to each of the memory
numbers before shipment. Use the memory
numbers by changing their torque value.