KNC-p3TR_XIR IP Turret Camera
·
Quick Operation Guide
13
13
13
Three side outlets on the enclosure are available, which makes
routing the cables easier if surface wiring will be used. Use a plier to
remove the plastic where it covers the wire outlet, and route the
cables through the hole.
3.
Connect the corresponding power/network cables.
4.
Attach the camera to the wall or ceiling with the supplied screws
and expansion anchors if needed. Be surer the surface can
support at least 3 times the weight of the camera.
Figure 2-4
Secure the Camera to the Ceiling
5.
Adjust the direction:
1).
Loosen the lock screw.
