KNC-p3TR_XIR IP Turret Camera
·
Quick Operation Guide
11
11
11
●
Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing haze, distortion or improper scene exposure.
●
Any foam ring around the lens must be seated flush against the
inner surface of the cover/bubble to isolate the lens from the IR
LEDS. Fasten the lens/dome cover to camera body so that the
foam ring and the dome cover are attached seamlessly.
Steps:
1.
Rotate the trim ring counterclockwise to remove it from the
camera.
Figure 2-1
Dissemble the Camera
Trim Ring
Camera
Module
