KT&C EZHD-TRF16 Скачать руководство пользователя

Страница: 3 / 188

User Manual of Digital Video Recorder User Manual

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following information:

•

Ensure that the unit is installed in a well-ventilated, dust-free environment.

•

These units are designed for indoor use only.

•

Keep all liquids away from the recorder.

•

Ensure environmental conditions meet factory specifications.

•

Ensure that the unit is properly secured to a rack (depending on model) or shelf. Major shocks or jolts to the unit as a result of dropping

it may cause damage to the sensitive electronics within the unit.

•

Use the device in conjunction with an UPS if possible.

•

Powering down the unit before connecting and disconnecting accessories and peripherals is recommended.

•

A factory recommended HDD should be used for this device.

•

Improper use or replacement of batteries may result in risk of explosion or other hazards. Replace batteries with the same or equivalent

type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.

Trademarks and Registered Trademarks

•

Windows and Windows mark are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other

countries.

•

HDMI, HDMI mark and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

•

The products contained in this manual are authorized by HDMI Licensing LLC with the use right of the HDMI technology.

•

VGA is the trademark of IBM.

•

UPnP

is a certification mark of the UPnP

Implementers Corporation.

•

Other names of companies and product contained in this manual may be trademarks or registered trademarks of their respective

owners.

Содержание EZHD-TRF16





























































































































































































Результаты поиска

Содержание EZHD-TRF16

Отзывы:

Похожие инструкции для EZHD-TRF16

Бренды по названию

Популярные бренды

KT&C EZHD-TRF16, Руководство пользователя

Результаты поиска

Содержание EZHD-TRF16

Отзывы:

Похожие инструкции для EZHD-TRF16

Бренды по названию

Популярные бренды