KT&C EZHD-TRF16 Скачать руководство пользователя

Страница: 123 / 188

User Manual of Digital Video Recorder User Manual

123

8.7

Setting Alarm Response Actions

Purpose:

Take alarm response actions will be activated when an alarm or exception occurs, including Full Screen Monitoring, Audible Warning

(buzzer), Notify Surveillance Center, Send Email and Trigger Alarm Output.

Full Screen Monitoring

When an alarm is triggered, the local monitor (HDMI, VGA or CVBS monitor) display in full screen the video image from the alarming

channel configured for full screen monitoring.

If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10 seconds (default

dwell time). A different dwell time can be set by going to Menu > Configuration > Live View.

Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.

Audible Warning

Trigger an audible

beep

when an alarm is detected.

Notify Surveillance Center

Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC installed with Remote

Client.

The alarm signal will be transmitted automatically at detection mode when remote alarm host is configured. Please refer to

Chapter 9.2.6

Configuring the Remote Alarm Host

for details of alarm host configuration.

Send Email

Send an email with alarm information to a user or users when an alarm is detected.

Please refer to

Chapter 9.2.11 Configuring Email

for details of Email configuration.

Trigger Alarm Output

Trigger an alarm output when an alarm is triggered.

This function is only supported by the EZHD-TRF DVRs.

Steps:

Enter Alarm Output interface.

Menu> Configuration> Alarm> Alarm Output

Select an alarm output and set alarm name and dwell time. Click

button to set the arming schedule of alarm output.

If “Manually Clear” is selected in the dropdown list of Dwell Time, you can clear it only by going to Menu> Manual> Alarm.

Содержание EZHD-TRF16





























































































































































































Результаты поиска

Содержание EZHD-TRF16

Отзывы:

Похожие инструкции для EZHD-TRF16

Бренды по названию

Популярные бренды

KT&C EZHD-TRF16, Руководство пользователя

Результаты поиска

Содержание EZHD-TRF16

Отзывы:

Похожие инструкции для EZHD-TRF16

Бренды по названию

Популярные бренды