KSR Moto T58 - ZION 125, Руководство по ремонту

Страница: 65 / 136

65
ENGINE
TRANSMISSION INSTALLATION
1. Controll the shafts and the gears if the work correct.
2. IF the shafts or gears are worn, replace it.
3. Install the transmission in reverse order.
See page: 55
INSPECTION - VARIOMATIC
Item Standard [mm] Allowable limits [mm]
Inner diameter of right hemisphere of drive wheel 24.00-24.02 24.04
Outside slippery sleeve
Width of triangle belt 21.8-22.0 20.5
Thickness of clutch friction panel 1.5 1.5
Inner diameter of outside sleeve of clutch 125-125.2 125.5
Free length of clutch press spring 140
Outside diameter of right hemisphereshaft sleeve of drive gear
Inner diameter of right hemisphere shaft sleeve of drive gear 34.00
Outside diameter of rolling ball 20-20.2
CLUTCH DISMANTLING
1.
5HPRYHWKH¿[LQJQXWQXWE\XVLQJDQDLULPSDFWZUHQFKWR
remove the clutch.
NOTE
When dismantling the clutch be aware. Use a clutch spring com-
pressor, a big gripper or your hands to compress the spring and
ask somebody for help if necessary. The clutch spring is com-
SUHVVHGDOOWKHWLPH1HYHURSHQWKH¿[LQJQXWZLWKRXWFRPSUHVV
-
ing the clutch.
DRIVEN DISC DISMANTLING
1. Remove the spring.
2. Remove the spring holder (2).
2
1