KSF CA 400 GL, Руководство пользователя

Страница: 24 / 32

K.S.F.
Because these safety instructions may not take into account the
specific conditions of each type use, the user must check before
each use, if the suction device is suitable for this type of
development work. Characteristics not specified in our catalog,
documentation or manuals are not guaranteed. Any warranty or
liability is thus excluded. We disclaim any responsibility in case
of non-compliance safety above.
～ ～
22
4. Make sure the surface / object to be lifted is of non-porous material.
In addition, the surface must be clean, dry and free of oils and
grease. On rough or porous surfaces, the holding capacity
decreases or is non-existent.
5. Always test the function of the suction cup prior to its use. Examine
handle for dents or cracks. Examine rubber pads for excessive
glaze, cuts or roughness.
6. Suction cup should only be sued for lifting, carrying and holding
objects for a short period of time. However, in the case of long
periods of attachment, check suction cup regularly to ensure firm
adhesion. If grip dose not feel sufficiently firm, reapply suction cup.
7. Do not place the cup face against surfaces which could damage the
sealing edges.
8. Avoid conditions that could cause the cup to slip or to disengage
prematurely, such as: contaminants, cuts or scratches in the cup
face or mounting surface.
9. Do not allow anything to interfere with free movement of the plunger
while the cup is attached.
10.Do not touch the release tabs or the valve release lever while lifting.
11.Do not use solvents, gasoline or other harsh chemicals to clean the
cup.