KSF CA 400 GL, Руководство пользователя, Страница: 22 / 32

K.S.F.
14. USE OF GLAZING INSTALLATION - CA 400
Pre-operation Inspection
1. The glass surface is reserved for clean, bearing no traces of oil or
grease.
2. The lever screw head orientation support should be checked before
each use.
3. The screw on the vacuum suction cups must be checked before
each use.
4. Check that the cables are in perfect condition
Set up
Raising the glass
1. Placed the CA400 Lifter opening for glazing.
2. Operate the brakes on all 4 wheels.
3. Install the glass in a horizontal centered position on the cradle.
4. Operate each of the vacuum suction cups (see especially section
"Using vacuum suction cups")
1. Raising the glass to desired height position, and place the glass
into a base shoe by using the function of the soft speed control
from the switch.
2. Once the glass pane been placed into the desired base shoe,
release the vacuum suction cups to release the glass.
The operator IS NOT ALLOW standing or working under the
glass cradle at anytime, to do that may cause serious injury.
～ ～
20