EN
12
PARTS DESCRIPTION
1
2
3
4
5
6
7
8
ONON
1
2
3
4
A
A
F
I
T
T
1
3
6
8
5
2
10
4
7
9
11
12
1.1
PCB DESCRIPTION
1. Terminals (clockwise):
1.1 Supply (+,-).
1.2 Tamper (T,T) solid state relay
1.3 Input for remotely inhibition (I)
1.4 Fault and mask output (F) (nc) open collector with the
second terminal in common to terminal (-)
1.5 Alarm (A,A) solid state relay
Notes:
• Input (I)
is used to enable / disable the LED remotely
• Fault output (F) Signals:
- Masking
- Failure of internal analysis (voltage, self diagnostic, etc...)
2. Micro-controller.
3. Dip switches:
3.1. Switch on Led RGB.
3.2. Switch on front anti masking analysis.
3.3. Switch on tamper analysis via MEMS
3.4. Switch on the EOL resistors,
for lares series control panels.
4. MEMS systems. (Accelerometer)
5. Front Microswitch
6. Indicator five colors RGB LED.
7. Microwave trimmer adjustment (MW)
8. Infrared trimmer adjustment (IR)
9. Microwave Sensor.
10. Infrared Sensor
11. Infrared LED for Anti-masking Analysis.
12. PCB Fixing hole.
1. Angular Mounting Bracket, reversible
2. Wall Mounting Bracket
3. Bottom
4. PCB
5. Front Cover
6. Screw Cover
7. LED lens
8. Fresnel lens
Installation kit:
•
N° 2 Dowels.
•
N° 2 Dowels for screw.
•
N° 2 Screws for installing the bottom on the Bracket or wall.
•
N° 1 Screw Cover.
•
N° 1 screwdriver.
