manualshive.com logo in svg

Ksenia KSV0010013.300, Руководство пользователя

Поделиться
Скачать
Ksenia KSV0010013.300 Скачать руководство пользователя страница 35

35

Network Camera

User Manual

Note:

The EAPOL version must be identical with that of the router or the switch.

4. Enter the user name and password to access the server.
5. Click “

Save”

 to finish the settings.

Notes:

•A reboot is required for the settings to take effect. 
•The camera supports Wi-Fi function doesn’t support 802.1X.

6.3.7 CONFIGURING QoS SETTINGS

PURPOSE

QoS (Quality of Service) can help solve the network delay and network congestion by 
configuring the priority of data sending.

STEPS

1.Enter the QoS Settings interface:

Configuration >Advanced Configuration > Network > QoS 

Figure 6.3.10 - QoS Settings

2. Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and 
Management DSCP.
The valid value range of the DSCP is 0-63. The bigger the DSCP value is the higher the 
priority is.

Note:

SCP refers to the Differentiated Service Code Point; and the DSCP value is used in the 
IP header to indicate the priority of the data.

3. Click “

Save”

 to save the settings.

Note:

A reboot is required for the settings to take effect. 

Содержание KSV0010013.300



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды