KSB Surpress Feu SFE.3, Инструкция по установке и эксплуатации

Страница: 24 / 40

1
2
3
4
5 6 7 8 9
Fig. 5: Control panel (rear): terminals
1 Power supply 2 Changeover contact for warnings
3 Changeover contact for alerts 4 Terminals for pump contactors
5 WSD inputs 6 Terminals for Pt1000
7 Service interface (Mini-USB) 8 Thermal motor protection and dry
running protection
9 Terminals for pressure sensor
7.1.1 Multi-functional button
The multi-functional button serves to
▪
set the start-up pressure
▪
reset alerts
▪
operate the pumps in manual mode
7.1.2 LEDs
The "traffic light" LEDs provide information about the pump system's operating
status.
Table 8: LED description
LED Description
Red: One or more than one alert is active
Amber: One or more than one warning is active
Green: Trouble-free operation
7 Operating the Pressure Booster System
24 of 40
Surpress Feu SFE.3