KSB PumpDrive 2 Eco, Инструкция по применению

Страница: 32 / 50

Version 1.4
Application Guide PumpDrive 2 Eco
2016-10-20
2016-11-11 PDrv2-Eco_Application_Guide_rev_1_4.docx
Page 31 of 48
26
27
11
26
27 GND
DO
GND
26
27
DO 11
DI-EN
+24V
GND
DI3
DI2
DI1
+24V
DICOM
AO-GND
AO
AIN2
NO
+24V
GND
COM
+24V
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
GND
GND
AIN1
+24V
28
+24V
DI
28
11
71
81
D C
B A
6
5
Configuration of drive 2 (AuxMaster):
Nr. Parameter Change value to Pre-settings by factory
2)
Changeable by
3-6-1 Type of Control 3 = Differential Pressure Preset ServiceTool, Display
3-11-2-1 Minimum Pressure -1.00 [bar] Preset ServiceTool
3-11-2-2 Maximum Pressure 10.00 [bar] Preset ServiceTool
3-11-2-3 Pressure Unit bar Preset ServiceTool
1-3-2 Setpoint (Closed-loop Control) 4.00 [bar] preset acc. specified Q,H ServiceTool, Display
3-8-4-1 Function M12 Module Input A 1 = PMtr Suction/Dis-
charge Pressure Preset ServiceTool, Display
3-13-5 PumpMeter Master/Slave Master Preset for Etaline Z ServiceTool
3-7-1 Role in multi pump operation 0 = master Slave when Etaline Z ServiceTool, Display
3-7-2 Pumps running 1 Preset ServiceTool, Display
3-7-4-1 Automatic pump change 1 = Operating hours Preset ServiceTool, Display
3-7-4-2 Time pump running 24 Preset ServiceTool, Display
3-8-6-1 Digital Input 1 Function System Start
1)
Preset ServiceTool
1) Digital Input 1 is set as at the factory as system start. If a digital input is set as system start, the parameter 1-3-1 System start is auto-
matically without function (see control point concept in operating manual)
2) Pre-settings for completely assembled pump, motor, drive and PumpMeter
Nr. Function
26 Enable power electronic
27 Ground for digital inputs
11 System start with DI 1)
28 Alarm
5 Tailor-made bus cable for double and multi pump operation (color: pur-
ple, male: angled, male: angled)
6 Actual value: tailor-made cross link bus cable for the redundant connec-
tion of PumpMeter (color: black, female: angled, male: angled)
Nr. Function
71 M12 Module: Double and multi pump operation
81 M12 Module: PumpMeter
A M12 Module female A: connection PumpMeter (Modbus)
B M12 Module female B: cross link bus cable PumpMeter (Modbus)
C M12 Module female C: Bus resistor
D M12 Module female D: for Double and multi pump operation (KSB-de-
vice bus)
PDrv2 Eco Or local Or PLC Drive