KSB moviBOOST VP, Руководство по эксплуатации

Страница: 2 / 30

moviBOOST VP
Sr. no. Description Page no.
1 General 1
2 Safety 1
2.1 Symbols used in these operating instructions 1
2.2 Personnel qualification and training 1
2.3 Non-compliance with safety instructions 1
2.4 Safety awareness 1
2.5 Safety instructions for the operator / user 1
2.6 Safety instructions for maintenance,
inspection and installation work
1
2.7 Unauthorised modification and manufacture
of spare parts
2
2.8 Unauthorised modes of operation 2
3 Transport and interim storage 2
4 Description 2
4.1 General description 2
4.2 Configuration and function 2
4.2.1 Configuration 2
4.2.2 Function 2
4.3 Dry running protection (supplementary
equipment)
3
4.4 Manual mode 3
4.5 Control cabinet 3
4.6 Flow diagram 4
5 Installation at site 5
5.1 Readiness for operation 5
5.2 Installation and location 5
5.3 Piping 5
5.4 Foundation 5
5.5 Location 5
5.6 Installing a pressure reducer 5
5.7 Location and installation of unpressurised
inlet tanks
5
5.7.1 Location 5
5.7.2 Installation 5
5.8 Valves and fittings 5
5.9 Noise characteristics 5
6 Connection to power supply 6
6.1 Electric wiring 6
6.2 Power supply cable 6
6.2.1 Sizing the power supply cable 6
6.3 Protective measures 6
6.4 EMC recommendations 6
6.5 Temperature requirements 6
6.6 Humidity requirements 6
6.7 Installation altitude 6
6.8 Pollution exposure 6
6.9 Checking the voltage 6
6.10 Logic / circuit diagrams 6
6.11 Over load relay 6
6.12 Potential equalization 6
Contents
Sr. no. Description Page no.
7 Commissioning / start-up 6
7.1 Preparations for commissioning / start-up 6
7.2 Test run 6
7.3 Checking the direction of rotation 7
7.4 Functional description / Automatic mode 7
7.5 Starting the unit 7
7.5.1 Function of the control panel 7
7.5.1.1 LEDs 8
7.5.1.2 Function keys 8
7.5.1.3 Navigation keys 8
7.5.1.4 Display 8
7.5.1.5 Service interface 9
7.5.2 Menu structure 10
7.5.2.1 Access levels 11
7.5.2.2 Displaying and changing parameters 11
7.6 Monitoring 11
7.7 Parameter list 12
7.8 Warnings and alerts - overview 18
7.9 Adjusting the settings 19
7.9.1 Setting the set pressure 19
7.9.2 Further settings 19
7.10 Remote-OFF connection 19
7.11 Fire alarm connection 19
7.12 Shutdown 19
8 Dismantling / reassembling the pumps 19
9 Returning to service 19
10 Maintenance 19
10.1 Operating monitoring 19
11 Work on the control cabinet 19
12 Inspection 20
13 Check list 20
14 Pre-set pressure 20
15 Electrical performance data 21
16 Shutoff head 22
17 Trouble-shooting 23
Acceptance report
24
Check list for commissioning / start-up 25
Annexure I - Environment Protection -
Product Disposal after useful life
26