KSB Hyamat K 0202, Оригинальное руководство по эксплуатации

Страница: 3 / 36

Hyamat K
3
Contents
Page Page
1 General 4
2 Safety 4
2.1 Marking of instructions in the manual 4
2.2 Personnel qualification and training 4
2.3 Non-compliance with safety instructions 4
2.4 Safety awareness 4
2.5 Safety instructions for the operator/user 4
2.6 Safety instructions for maintenance, inspection and
installation work 4
2.7 Unauthorized modification and manufacture of
spare parts 5
2.8 Unauthorized modes of operation 5
3 Transport and interim storage 5
4 Description 5
4.1 General description 5
4.2 Configuration and function 5
4.2.1 Configuration 5
4.2.2 Function 5
4.3 Dry running protection (supplementary equipment) 6
4.4 Manual mode (supplementary equipment) 6
4.5 Control cabinet 6
4.6 Flow diagram 7
5 Installation at site 8
5.1 Readiness for operation 8
5.2 Installation and location as per DIN 1988 8
5.3 Piping 8
5.4 Foundation 8
5.5 Installation 8
5.6 Acoustic cladding (supplementary equipment) 8
5.7 Installing an expansion joint 8
5.8 Installing a pressure reducer 8
5.9 Location and installation of unpressurized inlet tanks 9
5.9.1 Location 9
5.9.2 Installation 9
5.10 Valves and fittings 9
5.11 Noise characteristics 9
6 Connection to power supply 9
6.1 Electric wiring 9
6.2 Selecting a power supply cable 9
6.2.1 Sizing the power supply cable 9
6.3 Protective measures 9
6.4 Temperature requirements 9
6.5 Humidity requirements 9
6.6 Installation altitude 9
6.7 Pollution exposure 9
6.8 Checking the voltage 9
6.9 Logic / circuit diagrams 9
6.10 Motor protection switch 9
6.11 Potential equalization 10
7 Commissioning / start-up 10
7.1 Preparations for commissioning / start-up 10
7.2 Test run 10
7.3 Checking the direction of rotation 10
7.4 Functional description / Automatic mode 10
7.5 Starting the unit 11
7.5.1 Function of the control panel 11
7.5.2 Menu structure 13
7.6 Monitoring 14
7.7 Parameter list 15
7.8 Alerts and warnings – overview 21
7.9 Adjusting the settings 22
7.9.1 Setting the set pressure 22
7.9.2 Further settings 22
7.10 Connection remote-OFF 22
7.11 Connection fire alarm 22
7.12 Shutdown 22
8 Dismantling / reassembling the pumps 22
9 Returning to service 22
10 Maintenance 22
10.1 Operation monitoring 22
11 Work on the control cabinet 22
12 Inspection 23
13 Check list 23
14 Pre-set pressure 23
15 Electrical performance data 24
16 Shutoff head 25
17 Trouble-shooting 26
18 System schematic, List of components 28
19 Annex 32