KSB 4STQ Series страница 9 Скачать руководство пользователя

Страница: 9 / 44

3 Transport/Storage/Disposal

9 of 44

4STQ

2580.821/04-EN

3 Transport/Storage/Disposal

3.1 Checking the condition upon delivery

1. On transfer of goods, check each packaging unit for damage.

2. In the event of in-transit damage, assess the exact damage, document it and

notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.

3.2 Transport

CAUTION

Improper transport

Damage to the mechanical seal!

▷

Only transport the mechanical seal in suitable packaging.

▷

Observe the weights, symbols and instructions indicated on the packaging.

▷

Use suitable, approved lifting accessories.

KSB’s standard packaging is suitable for dry transport ,e.g. by truck, rail, air. Special
packaging can be provided if specified in the contractual agreement.

CAUTION

Removing transport locks too early

Damage to previously locked components during transport!

▷

If transport locks are fitted, do not remove them too early.

3.3 Storage/preservation

CAUTION

Improper storage

Damage due to humidity, vermin, corrosion and contamination!

▷

Avoid outdoor storage.

▷

Observe, check and record the storage conditions.

▷

Regularly check the packaging for any damage.

▷

Regularly check the humidity indicator of shrink-wrapped objects. (The relative
humidity should be < 50 %.)

▷

If the relative humidity indicated for shrink-wrapped objects > 50 %, have the
equipment checked and repacked by the manufacturer.

CAUTION

Improper storage

Impairment of O-rings' sealing function!

▷

Do not store O-rings together with chemicals, solvents, fuels, acids, etc.

▷

Protect O-rings from light, in particular from direct sun exposure and strong
artificial light high in ultraviolet rays.

▷

Check the O-rings for damage before they are fitted.

Содержание 4STQ Series













































Результаты поиска

Содержание 4STQ Series

Отзывы:

Похожие инструкции для 4STQ Series

Бренды по названию

Популярные бренды

KSB 4STQ Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 4STQ Series

Отзывы:

Похожие инструкции для 4STQ Series

Бренды по названию

Популярные бренды