KSB 4STQ Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 44

KSB 4STQ Series Скачать руководство пользователя страница 18

5 Installation/Dismantling

18 of 44

4STQ

2580.821/04-EN

5.3.2 Installing the C033/055M1-4STQ double cartridge seal

WARNING

Components with sharp edges

Risk of cutting or shearing injuries!

▷

Always use appropriate caution for installation and dismantling work.

▷

Wear work gloves.

CAUTION

Use of grease or other permanent lubricants

Torque transmission impeded / overheating of and damage to the pump!

▷

Never use grease or other permanent lubricants for fitting the torque-
transmitting elements of a mechanical seal.

▷

Use soft soap to reduce any friction caused during assembly.

▷

Never coat the mechanical seal faces with grease or oil.

CAUTION

Improper installation of the mechanical seal

Damage to the seal faces!

▷

Install the mechanical seal using the supplied mounting device C.

▷

Prevent sudden forces acting on the mounting device and mechanical seal.

ü

The relevant documentation for installing the mechanical seal is observed.
(

Section 9.1.3, Page 36)

ü

The back pull-out unit has been removed from the pump casing and safely
positioned and secured in a horizontal position.

ü

The original 4STQ cartridge seal is fully assembled and undamaged.

ü

Mounting device C is available.

1. Guide the mechanical seal (without external O-rings) onto the shaft as far as it

will go.

A

1

Fig. 4:

Illustration of the groove

2. Visually check that the groove for the circlip in discharge cover 1 aligns with the

corresponding surface of the mechanical seal (seal housing).

3. Pull the mechanical seal off the shaft.

4. Fit the circlip in the shaft groove.

«
...
16
17
18
19
20
...
»

Содержание 4STQ Series













































Отзывы:

Нет отзывов