5
4
STEP 3 – cONNEcTINg ThE waTER SuPPly
1
Fit the flexible pipe coming
from the faucet to the
solenoid valve housing.
IMPORTANT: Inlet and outlet
should follow the indicating
arrow in the solenoid
housing
2
The faucet is provided with
an inlet nipple, if needed,
fit the water supply inlet to
the adapter at the solenoid
valve housing.
3
Turn on the central water
supply and the shut-off
valve (angle valve) and
check for leaks.
INSTallaTION
INSTallaTION
STEP 1 - REMOvE all MOuNTINg haRDwaRE
Shut off water supply and remove the
hexagonal nut, the disk and the gasket.
Do not remove the o-ring from the base of
the faucet.
O-ring
gasket
Disk
Hexagonal nut
STEP 2 – INSTallINg ThE faucET
1
Place the faucet with the o-ring
into the hole in deck or lavatory.
Make sure the o-ring is located
between the deck or lavatory and
the bottom of the faucet.
O-ring
Center
hole
2
under the deck, slide the gasket,
disk and hexagonal nut over
the flexible hose and secure the
faucet into place.
NOTE:
Make sure that the filter
is assembled between the
housing of the solenoid valve
and the inlet nipple.
gasket
O-ring
Hexagonal nut
Disk
size of the hole:
29-31 mm / 1.14”-1.22”
