English
14
n
Then turn the dial to the
O
(i1)
(fig. 15)
position and wipe the
outside of the steam nozzle with a clean cloth.
For thorough cleaning of the steam nozzle, see Section 7, “Cleaning of
the steam Nozzle”.
7. CLEANING AND MAINTENANCE
O F T H E A P P L I A N C E :
n
Make sure the coffee machine is unplugged and completely cooled
down before you begin to clean it.
n
The removable parts can be cleaned using a cloth and gentle
washing-up liquid and water.
n
Do not immerse the coffee machine in water or any other liquid.
O F T H E F I LT E R H O L D E R H O U S I N G :
n
Using a damp cloth, regularly clean the filter holder housing in order to
remove any coffee residue which may be stuck there.
n
To prolong the life of the percolation head gasket seal, do not put the
filter holder back into place if the coffee machine is not to be used for
a long time.
O F T H E S T E A M N O Z Z L E :
n
Regularly remove the plastic accessory of the steam nozzle
(k)
(Fig. 16)
and rinse it.
n
To unblock the hole in the steam nozzle outlet, you may use a needle.
O F T H E D R I P T R AY :
n
The drip tray must be emptied after each time the appliance is used.
n
If multiple espressos are prepared one after another, it should be
emptied from time to time (every 6 cups of espressos approximately)
(fig.17)
.
n
The presence of water is normal and is not the sign of a leak. If
necessary, clean the drip tray
(m)
and its grid
(l)
with water and a
little gentle washing-up liquid, rinse and dry.
n
Make sure the drip tray is put back into place properly
(fig. 18)
.
Caution! Do not put any of these parts into the dishwasher.
IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page14
