53
Situation
When brewing your cup, one of the air
bubble streams in the Smart Brewing
Orb stops working.
Weak Brew and Large Cup (buttons far
left and far right) lights are flashing
All lights flashing
Small and Large Cup lights are flashing
The ON/OFF button flashes
Solution
•
When the holder is in the down
position, gently clean the base of the
Brewing Orb with a clean damp cloth
or soft brush.
•
If this does not solve the issue,
perform a descaling cycle, refer to the
section ‘Descaling the
T.O by Lipton
machine’ page 46.
•
The machine requires a prime cycle.
Please refer to the section ‘Setting up
your
T.O by Lipton
Machine’ page 38.
•
Please switch off the machine for 10
minutes and switch on again.
•
Make sure the water level is always
above the minimum mark (MIN).
•
Make sure you have primed your filter,
refer to the section “Priming before
first use” page 38.
•
The machine requires a rinse cycle.
Please refer to section ‘Rinsing the
Smart Brewing Orb’ page 43.
•
Water filter needs changing. Refer to
the section ‘Replacing the BRITA water
filter’ page 48.
Any questions?
Watch our videos on
www.TO-Lipton.com
Our Customer Service is here to help:
0 800 033 033
(free call from landlines)