Krups Espresseria Automatic EA82 Series, Использование и обслуживание

Страница: 49 / 327

Use and maintenance / SERIE EA 82xx
KRUPS Espresseria Automatic Premium
11
DEUTSCH
ENGLISH
FRANCAIS
NEDERLANDS
DANSK
SVENSKA
NORSK
SUOMI
IT
ALIANO
3 First use
Installing the appliance
3.1 Before using for the first time
Danger : Connect the appliance to a mains socket of 230 V that is earthed.
Failure to do so means that you run the risk of fatal injury due to electricity!
Respect the safety guidelines (see point 1.3).
Place your machine on a stable, flat, heat-
resistant surface. Ensure that the location chosen is sufficiently ventilated as the
appliance gives off heat.
Before using the appliance for the first
time, check the hardness of your water
so that you can adapt the appliance to
suit. This operation is also to be carried
out when you use your machine in a
place where the hardness of the water is different or if you notice a difference in
the hardness of the water.
To check the water hardness, use the
stick supplied with your machine or
contact your local water authority.
Fill a glass of water and immerse the stick in it
for several seconds.
Wait for a minute before reading the water hard-
ness.
The red zones on the stick indicate the degree
of hardness: no red zone = class 0, One red
zone = class 1, etc. (see illustration).
0 1 2 3 4
The hardness class observed (from 0 to 4) will
be requested during the initial set up of the ma-
chine described in point 3.3 in the "water hard-
ness" sub-menu. Use the data in the table below
for this purpose :
Table 2: The water hardness classes for the initial setting of the appliance (point 3.3).
Measuring the water hardness
Degree of
hardness
Class 0 Class 1 Class 2 Class 3 Class 4
° dH < 3° > 4° > 7° > 14° > 21°
° e < 3,75° > 5° > 8,75° > 17,5° > 26,25°
° f
< 5,4° > 7,2° > 12,6° > 25,2° > 37,8°
Setting the
appliance
0 1 2 3 4