Kruger&Matz KMP220BT, Руководство пользователя

Страница: 9 / 20

9
Owner’s manual
EN
connected first.
• Battery capacity status: when earphone is connected to iOS
devices, iOS devices shows the earphone battery power status in
the upper right corner.
Operation LED Status
Power on Blue LED flashes 2 times
Power off Red LED flashes once
Pairing Red LED & Blue LED flashes alternately
Standby Blue LED flashes 3 times every 5 seconds
Low battery Red LED blinks
Charging Red LED is on during charging.
Blue LED is on once charging finished
Charging
Before charging, make sure the earphones has been switched off.
Connect the earphones to AC charger or a computer USB port. Red
LED keeps lighting during charging. Once the charging is completed,
the blue LED is on.
Note:
• be sure the battery has been charged fully before first use
• Charge the device regularly to keep its battery in good condition
• The earphones battery indicator will be displayed when
connected to iOS devices
• Use only original accessories to charge the earphone.
Specification
• Speaker size: 8 mm
• Magnet: neodymium
• Voice coil: CCAW
• Frequency response: 20 Hz-20 kHz
• Impedance: 16 Ω
• S/N ratio: ≥ 58 dB
• THD: < 1% (1 kHz)
• SPL (Sound pressure level): max. 96 ±3 dB
• Nominal input power: 3 mW
• Maximum input power: 8 mW
• Bluetooth: 4.1
• Bluetooth range: up to 10 m