Kruger KRK 10, Инструкция по эксплуатации

Страница: 26 / 32

ENGLISH
26
M1337-0_dratft-03
Installation
For correct installation, follow the series of opera-
tions described below.
E
The appliance must be placed in a room
where there are NO sources of ignition
continuously operating (for example: open
flames, electric or gas heaters).
Handling
Before installation it is advisable to bring the packed
dehumidifier as close as possible to the place where
it will be mounted.
E
CAUTION: The size and the weight of the
machine require the aid of means such as
pallet trucks and trolleys for handling.
NEVER lift the machine alone.
Placement
Pic.2 –
Positioning and minimum distances
E
Respect the minimum distances (Pic.2) and
be sure the inlet and oulet grids are never
obstructed.
Wall installation
• Use the bracket as a template to mark the holes on
the wall as shown in Pic.3.
E
Make sure that the wall is able to support
the device in operating conditions.
• Drill on the wall n.3 holes Ø10mm, 65mm deep as
shown in Pic.3. Alternatively, you can apply small-
er screws (not supplied) using the four Ø5 holes.
• Clean the inside of the holes.
• Insert the three supplied expansion plugs holding
in vertical position the expansion tabs.
• Secure the bracket using the three screws supplied.
C
To respect the minimum distance of 0,5 me-
ters from the bottom (Pic.2) drill the holes
to at least 0.8 meters from the floor.
Pic.3 – The wall bracket
• Lift the machine and hook the rear bracket S to M
bracket mounted on the wall.
Pic.4 – Placement of the dehumidifier on the wall.
• Rotate the two legs T, which are located on the
rear-bottom side of the frame, to make vertical the
position of the dehumidifier.
• Make sure the dehumidifier fits completely on the
rear bracket M.
Safety locking
Install the safety bracket R in the bottom side of the
dehumidifier. The bracket must be fixed to the wall
and the structure of the dehumidifier with the screws.
Pic.5 – The safety bracket
E
Do not operate the dehumidifier without
the safety bracket. The safety bracket must
be firmly screwed to the dehumidifier and
the wall.
E
The absence of the safety bracket may
cause an accidental fall of the machine and
cause damage, even serious, to persons and
property.