Krüger & Matz KMP60TW, Руководство пользователя

Страница: 17 / 48

Owner’s manual
17
EN
MONO MODE
The earphones may be used in mono mode.
1. If the earphones have been previously connected with external
device, just take the desired earphone out from the charging case.
It will turn on and automatically connect with external device.
2. If the earphones haven’t been connected with external device
before, take the desired earphone out from the charging case
and proceed according to the instructions in the Bluetooth
pairing section to pair the earphone with external device.
RESET
1. Take out the earphones from the charging case.
2. Press and hold the MFB on both earphones for about 15 seconds.
During this time, LED indicator will flash twice blue – red - blue.
Release the button. The earphones have been reset successfully.
SPECIFICATION
Speaker size: 8 mm
Magnet: neodymium
Voice coil: CCAW
Frequency response: 20 Hz – 20 kHz
Impedance: 32 Ohm
S/N ratio: >=75 dB
THD: <2% (1 kHz)
SPL (Sound pressure level): 100 dB +/-3dB
IPX5 waterproof
Bluetooth version: 5.0 + EDR
Bluetooth range: up to 10 m
Bluetooth profiles: A2DP v1.2, AVRCP v1.0, HSP v1.0, HFP v1.5
Supported formats: AAC