25
Owner’s manual
English
Wiring operation for steering wheel control
Single wiring for steering wheel control: connect KEY1 (brown) and KEYGND (black)
in the wire bundle of power cord of the system with KEY1 (brown) and KEYGND
(black) in steering wheel of cars. The schematic diagram is as the following:
Steering wheel control KEY1
Steering wheel control GND
Double wiring for steering wheel control: connect KEY1 (brown) KEY2 (brownish black),
KEYGND (black) in the wire bundle of power cord with KEY1 (brown), KEY2 (brownish black)
and KEYGND (black) in steering wheel of cars.The schematic diagram is as the following:
Steering wheel control KEY1
Steering wheel control GND
Steering wheel control KEY2
Specification
Technical parameters
Max. power: 4 x 45 W
RMS power: 4 x 35 W
SNR: 60 dB
Channel separation: ≥ 30 dB
Power supply: 9-15 V DC
Load impedance: 4 Ohm
Fuse: <10 A
Display
Size: 7”
Panel: TN
Resolution: 1024x600 px
Aspect ratio: 16:9
Touchscreen: Capacitive, 5-point
Display brightness: Adjustable
