Krüger & Matz KM1162.1, Руководство пользователя

Страница: 19 / 40

19
Owner’s manual
English
b. Tap „Network & Internet” in the settings menu.
c. Tap „Wi-Fi” on the left.
d. Move the slider for Wi-Fi from „Off” to „On”.
e. Tap the network that you wish to connect to.
f. Tap „Connect”. Enter the network key (password) if necessary. The
device connects to the selected network.
cOnServing energy
• Deactivate the Wi-Fi function when it is not in use.
• Keep the device connected to power mains only until it is fully charged.
• Reduce the display brightness in the unit settings.
• Switch to standby mode/turn it off when the device is not in use.
Overheating
While charging, the temperature of the device and the charger may get increased.
This does not affect the device’s lifespan or performance and is in the device’s
normal range of operation.
However, if there is an excessive increase in temperature or overheating, depending on
the factor that caused it: device’s performance may be significantly reduced, charging
process may be stopped, the device may turn off or display notification about switching
off for cooling. Function available only in selected models. Important: if the device displays
notification about overheat, turn it off and do not turn it back on until completely cooled
down!
In case of overheat during charging:
1. Disconnect the charger from the device.
2. Close any running apps.
3. Wait for the device to cool down, and then begin charging the device again.
If the part of the device where the DC-in is placed overheats, check for damage to
the connected charger. Replace the damaged charger with a new authorized one.
The device may also overheat during operation when using several battery
consuming applications or functions. In case of overheat during usage:
1. Close any running apps.
2. Disconnect any connectivity (Bluetooth, Wi-Fi, data transfer etc.).
3. Lower the screen brightness settings.
4. Wait for the device to cool down before attempting to use it again.
Safety precautions concerning operation environment
In order to maintain battery’s longevity, and to avoid overheat, follow basic
precautions including provisions listed below:
1. Do not use / store the device in very hot or cold environments nor expose to
direct sunlight (e.g. on a car’s dashboard when using as a navigation).
2. Do not place the device on surfaces that may cause overheat e.g. electric heating mat.