Krüger & Matz Cinematix 3.1, Руководство пользователя

Страница: 19 / 68

19
Owner’s manual
EN
FM RADIO MODE
TUNING IN AND STORING FM RADIO STATIONS
TROUBLESHOOTING
Problem Possible solution
No sound when the device is turned on • Check if the device is connected to
power supply and the Power switch
at the back panel is set to I position
• Check if correct input is selected
• Check if the volume is set to the
minimum
• Check if the speaker is connected
correctly
• Check if mute mode is enabled
There is no sound of the center speaker • Check if one of the available sound
effects is enabled
There is no sound from one or more
speakers
• Check if the speakers are correctly
connected
• Check if audio cables or speakers
are damaged
• Check if the terminals are damaged
1. First select FM radio mode. Keep pressing button on the remote control or the
device’s front panel until [FM radio] w appears on the display.
2. Then keep pressing button on the remote control or the device’s front panel
until TUNING appears on the display.
3. Use -/+ buttons on the remote control or the device’s front panel to search for
available FM radio stations.
4. Save the station in the device’s memory:
• Press MEM button- the digits will flash on the display;
• Use +/- buttons to select the preset number;
• Press MEM button to store the station.
Note: You can store up to 30 of your favorite stations to the device’s memory.