If you order your Krown 100 with wireless option, use the supplied cable to connect your TDD direct
to a select digital cell phone, or a cordless phone with 2.5mm headset jack. When purchasing a cell
phone and service from your Krown 100, make sure you get a TDD compatible unit or look for the
TDD-cell phone symbol.
MAKING A CELLULAR CALL WITH YOUR KROWN 100
Always charge the TDD and your cell phone in full before use. Make sure you get a strong signal from
your provider and your TDD is off. Setup your cell phone to work in TDD mode.
1. Connect the cable from the cell phone to the TDD
2. Turn on your TDD
3. Select TDD mode on your cell phone (refers to your cell phone manual for more detail).
4. Dial the number you are calling on the cell phone.
5. If the other party’s TDD picks up, the Krown 100 will display text and the conversation has
been started.
ANSWERING A CELLULAR CALL
Make sure to turn the Ringer of your cell phone to vibrate mode. If your battery doesn’t support this
mode, you may need to order a vibrate batter from your cell phone provider.
1. If the cell phone vibrates, you have an incoming call, connect your Krown 100 using the
cable that come with your TDD to the cell phone.
2. Answer the call on your cell phone (usually your press “talk” or “send” button on your
cell phone. Refer to your instruction book for how to answer a call for your phone)
3. Turn on your Krown 100 and type your greeting message.
When you are ready to hang up, turn off the Krown 100 and press the button to hang up the call for
your cell phone.
*NOTE: Connecting g your Krown 100 to a wireless phone is an option. Please call your Krown’s
representative to have it installed.
XII
32
USING YOUR KROWN 100
WITH A WIRELESS PHONE
OR
