DIRECT CONNECT WITH THE KROWN 100 (CONT.)
Press...
Selects Auto-Answer mode.
Clears overflow buffer where incoming messages are stored.
Your TDD Auto-Answer is now
ready to answer calls.
Your incoming TDD calls will be answered, printed and stored in Memory Bank 5.
To answer an Incoming Call when the Auto-Answer is ON:
1. Press the SPACE BAR once before or after Auto-Answer message is sent.
• The Auto-Answer is removed.
• The Krown 100 is now “on-line” with caller.
Alerts your caller that you are on
the line.
Type your greeting on the keyboard.
Your TDD is again in Auto
Answer and ready to answer calls.
NOTE: Your Krown 100 will automatically disconnect and return to Auto-Answer after 30 seconds if
neither person is typing. If you need to prevent this form happening:
You will now not be disconnected.
IMPORTANT: To end your call and return to Auto-Answer:
You have now disconnected the phone line
and you are back in Auto-Answer.
To turn Auto-Answer OFF:
TO ACTIVATE REMOTE MESSAGE RETRIEVAL AND DELETION
The Remote Message Retrieval feature lets you retrieve your message while away from home. You
may also delete (erase) these messages after you have read them.
To enter setup
22
CTRL
+
0
CLR MEM 5 NOW? Y/N
Y
OR
N
AUTO ANSWER ON
X
+
X
+
X
XXX
HELLO
XXX HELLO
CTRL
+
9
AUTO ANSWER ON
CTRL
+
0
NO TIMEOUT
CTRL
+
9
AUTO ANSWER ON
CTRL
+
0
AUTO ANSWER OFF
CTRL
+
5
EDIT: MESSAGE (1-5) PHONE (D)IRECTOR
(A)UTO-ANSWER (E)MERGENCY-ADDR E(X)IT
