manualshive.com logo in svg

Kronos InTouch DX, Руководство пользователя

Поделиться
Скачать
Kronos InTouch DX Скачать руководство пользователя страница 125

View Reports

125

To run the report:
1. Tap 

View Reports

.

2. Tap 

Readers

.

Biometric

This report is available only for InTouch DX devices that include a biometric 
validation device. The report displays statistics about the biometric activity at the 
device, including:
•

The number of templates that are stored in the biometric device. If a single 
employee enrolls both a primary and a secondary finger, the device counts 
them as two templates.

•

The maximum number of templates that the device can hold, and the current 
number of templates.

•

The number of successful finger scan images.

•

The number of times that the device could not associate a template with the 
badge ID of an employee.

•

The number of firmware and hardware errors associated with the device.

Note:

 The number of event occurrences are cumulative totals. You cannot reset 

the totals or report on specific time spans.

1. Tap 

View Reports

.

2. Tap 

Biometric

.

Содержание InTouch DX





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды