manualshive.com logo in svg

Kronos InTouch DX, Руководство пользователя

Поделиться
Скачать
Kronos InTouch DX Скачать руководство пользователя страница 122

Chapter 4    Maintenance Mode Functions

122

Database

This report displays information about the tables in the database. It includes 
information about punches, employees, and the biometrics function.
To run the report:
1. Tap 

View Reports

.

2. Tap 

Database

.

Hardware

This report displays information about the hardware inside or attached to the 
timeclock, including:
•

The serial number of the timeclock, and the device ID.

•

The kinds of optional devices that are installed (for example, remote bar code 
reader, proximity reader, biometric scanner, and so).

•

The formats of the optional devices.

•

The amount of total and used memory.

•

The amount of total and used disk space.

To run the report:
1. Tap 

View Reports

.

2. Tap 

Hardware

.

Communication Settings

Note

: The Communication Settings report is only available with devices that 

operate in device-initiated mode.

This report displays all of the settings that you configured using the 
Communication Settings function (See 

“General Communication”

 on page 105). 

The information in the report can help you diagnose problems with the device.

Содержание InTouch DX





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды