Kronen-Mixer KM-2
15
Instruction Manual
English
Never
use the blender
without having the lid properly in place.
Hold the lid by hand!
Danger of scalding from hot drinks!
To avoid heavy injuries or damages of the appliance, it is for-
bidden, while mixing to reach into the container with hands or
with a hard solid object. This is although valid by a standing
still motor and assembled container, in case of unintentional
switching. Do not reach into the container with a hard solid
object by opening the lid lock.
The blender should
never
run
without container
.
Never put a cutter assembly on the motor base without
the container!
Only fit or remove container when motor is stationary.
Do not touch, nor with any other object, the rotating coupling
piece on top of the motorbase.
- Insert the container on the motor base, taking care to keep it
vertical.
- Add ingredients to be mixed.
- Place the lid.
- Switch on motor and vary the speed according to the ingredients
being mixed, turn the speed control knob clockwise until the desi-
red speed is reached. The maximum speed is reached at position
8.
- Turn off: Turn the speed control knob counter clockwise to „0“,
after remove the lid or the container.
- unpluq the appliance
Particularly in the case of thick, viscous materials, the lowest pos-
sible speed should not be selected (so that the motor is not heated
up unnecessarily).
Liquids and fine grained materials can be added through the filler
opening in the lid of the container during operation (Remove the lid
lock).
By switching on and operating at high speed, it is recommended
that the bowl should be held (lay hand on the lid).
Mix
