36
The disc arms that are fitted with the
tines must be mounted in accordance
with the direction of rotation. Take note
of the stickers on the rotary tedder.
• Beige tines = anti-clockwise disc
• Green tines = clockwise disc
1. Special safety instructions
•
Place the rotary tedder on a firm, level surface.
•
Before starting the rotary tedder, fit all safety equipment.
•
When folding the outer discs to working position, make sure that nobody is in the swivel
area of the discs.
•
Special care is required when mounting the components supplied with the rotary tedder.
2. Preparations
•
Dismantle the protective frame that is screwed for
the transport to the rotary tedder.
•
Take off the PTO shaft.
•
Unscrew the tine arms with the tines from the
control tube of the border spreading attachment.
•
Move the rotary tedder to working position.
3. Mounting the wheels
For reasons of transport, some undercarriage wheels
are not mounted. They must be so mounted that, for
discs that rotate anti-clockwise (beige tines), the wheel
bracket is to the right of the wheel. For discs that rotate
clockwise (green tines), the wheel bracket must be to
the left of the wheel. (in Fahrtrichtung gesehen)
4. Mounting the disc arms to the disc
plates
Fix the tine arms (2) from below to the disc plates (6)
with M16 bolts (5) and spring washers. Do
no tighten the bolts. Then inserte M12 bolts (1) with
washers from above and place them through the hole
in the tine arm. Push on the semi-round support (3)
as shown in the illustration. When all tine arms have
been fitted as described, place the reinforcement ring
on the bolts and secure the bolts with nuts and wash-
ers. For the torque settings, see chapter 4 "Care and
maintenance".
Make sure that the height adjustment of
the wheels is the same
KW-0-067
1
2
3
6
5
4