Krone EasyCut F 320, Оригинальная инструкция по эксплуатации

Страница: 14 / 86

2 Safety
2.3 Basic safety instructions
14 Original Operating Instructions 150000802_00_en
2.3.6 Additional equipment and spare parts
Additional equipment and spare parts that do not correspond to the requirements of the
manufacturer may affect the operational safety of the machine and cause accidents.
„
To ensure operational safety, use original parts or standard parts which correspond to the
requirements of the manufacturer.
2.3.7 Jobs on the machine
Passengers
Passengers can be seriously injured by the machine or fall from the machine and be overrun.
Ejected objects may strike and injure passengers.
„
As a result, make sure that no one except the operator is on the machine.
2.3.8 Operational safety: Technically sound condition
Operation is only allowed after proper start-up
The operational safety of the machine is not ensured when it is not started up properly
according to these operating instructions. Thus accidents may be caused and persons may be
seriously injured and killed.
„
Only use the machine after proper start-up,
refer to page 38
.
Technically sound state of the machine
Improper maintenance and setting could influence the operational safety of the machine and
cause accidents. Thus there is a risk of serious injuries or death.
„
All maintenance and setting work must be performed according to the chapters
“Maintenance and Setting”.
„
Before performing any maintenance and setting work, shut down and safeguard the
machine,
refer to page 23
.
Danger from damage to the machine
Damage to the machine may affect the operational safety of the machine and cause accidents.
Thus there is a risk of serious injuries or death. The following parts of the machine are of special
importance for safety:
•
Brakes
• Steering
• Safety devices
• Connection fittings
• Lighting
• Hydraulics
• Tyres
• Universal shaft