9
Driving and Transport
9.2
Switching off the machine
52
EasyCut F 320 M
Original Operating Instructions 150000808_01_en
WARNING
Risk of injury when removing the supporting chains
In the working position the retaining chains are subject to high drawing tension. In case an
attempt is made to remove or adjust the supporting chain when the machine is in the working
position, people may be seriously injured or killed.
The supporting chains must only be removed or set when the machine is in the transport
position.
Raise the machine to the transport position via front hydraulics,
.
Shut down and safeguard the machine,
Remove the supporting chains (2) on the tractor side and attach them to the supports (1) of
the holder.
Lower the machine via the front hydraulics,
.
For the “hydraulically folding side guards” version:
Depressurise the tractor hydraulics.
Shut down and safeguard the machine,
Remove the supporting chain (5) of the universal shaft on the tractor side.
Remove the universal shaft (6) on the tractor side and place it on the universal shaft bracket
(7).
For the “lighting” version:
Pull the 7-pin plug of the connection cable out of the 7-pin
socket of the tractor and place it on the machine.
For the version with “hydraulically foldable side guards”:
Uncouple the hydraulic hoses
from the tractor, attach the dust caps and place them on the machine.
Pull the spring cotter pin (3) out of the triangle linkage.
Release the locking from the holder.
Lower the front linkage hydraulically until the triangle linkage of the tractor is under the
holder of the machine.
Carefully move out of the holder by reversing the tractor.