Krone EASYCOLLECT 6000, Руководство по эксплуатации, Страница: 31 / 52

IV - 1
Maintenance
4 Maintenance
4.1 Special safety instructions
Repair, maintenance and cleaning
tasks must only be performed while the
engine is stopped!
Remove the ignition key and secure the
forage harvester from being placed in
operation or rolling away
unintentionally.
For repair, maintenance and cleaning
jobs on a raised maize header always
secure it with suitable supporting
pieces and close the shut-off valve!
4.2 General aspects
• Test nuts and screws regularly (about every 50
hours) for firm seat and tighten according to the
tightening torque tables if necessary! Deviating
tightening torques are indicated separately in the
text.
Self-locking nuts must always be
replaced.
Tightening torque M
A
Only perform tasks on the hydraulic
system when all excess pressure has
been released.
Liquid escaping under high pressure
can penetrate through the skin and
cause severe injuries. In the event of
injuries, find a physician immediately.
There is danger of infection.
After all repair, maintenance and
cleaning tasks are complete, all
protective coverings and safety mecha-
nisms must be put in place again.
A = thread size
(stability class can be seen on the head of the screw).
A
5.6
29
42
2,2
4,5
7,6
18
37
64
100
160
4,4
8,7
15
36
72
125
200
215
310
1050
330
350
M 4
M 5
M 6
M 8
M 10
M 12
M 14
M 14x1,5
M 16
M 16x1,5
M 20
M 24
6.8
M (Nm)
8.8 10.9
A
O
/
12.9
M 24x1,5
M 24x2
M 27
M 27x2
M 30
5,1
10
18
43
84
145
235
255
365
2450
390
3,0
5,9
10
25
49
85
135
145
210
225
730
710
1220
1350
1800
1950
2100
1150
1550
1650
1450
800
1100
1150
610 425
8 . 8
1
0 . 9
A
BP380-7-073