Krone EASYCOLLECT 6000, Руководство по эксплуатации, Страница: 20 / 52

III - 2
Start-up
3.4 Attaching
3.4.1 Adjusting the adapter frame
Only when the forage harvester is
initially attached or replaced.
• Measure the axle base „a“ between holding claw (1)
and locking hook (2) on the pendulum frame of the
forage harvester.
1
2
3
a
EC200090
4
1
2
EC200080
a
• Check the axle base „a“ between the holding bolt
(1, 3) of the adapter frame on the maize header and
if necessary adapt it to the size of the pendulum
frame.
Make the adjustment equally on the
right and left of the adapter frame.
• Loosen the screw connections (2) and shift the
pendulum frame holders (3) to the correct distance.
• Tighten the screw connections (2).
• Before driving the forage harvester into position,
fold down the protective cover (4).