Krone Comprima CF Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 34

Krone Comprima CF Скачать руководство пользователя страница 3

Operation

3

Pos: 4.1 /Ü berschriften/Ü berschriften 1/A- E/Bedienung @ 0\mod_1199789505403_78.docx @ 34825 @ 1 @ 1

2

Operation

Pos: 4.2 /BA/Sicher heit/2. Vor angestellte War nhi nweise/WARNUN G - Nichtbeachtung der grundleg enden Sicher heitshi nweise alte F or m_fuer D okumente auß erhalb BA @ 346\mod_1435140185111_78.docx @ 2611865 @ @ 1

WARNING!

If the basic safety instructions are not followed, people may be seriously injured or
killed.

•

To avoid accidents, the basic safety instructions in the Safety chapter of the machine

operating instructions must be read and followed.

Pos: 4.3 /BA/Sicher heit/2. Vor angestellte War nhi nweise/WARNUN G - Nichtbeachtung der Sicher hei tsrouti nen alte F orm_fuer Dokumente auß erhalb BA @ 346\mod_1435210033558_78.docx @ 2612235 @ @ 1

WARNING!

If the safety routines are not adhered to, people may be seriously injured or killed.

•

To avoid accidents, the safety routines in the Safety chapter of the machine operating

instructions must be read and followed.

Pos: 4.4 /BA/Sicher heit/R undball enpresse/Unkontrolli ertes Bewegen der R undball en @ 298 \mod_1412760657163_78.docx @ 2334147 @ @ 1

Warning!

Risk of injury from uncontrolled movement of round bales

•

On slopes, always lay down round bales in such a way that they cannot move on their

own. On account of their weight and their cylindrical shape, they can cause severe

accidents if they have once started moving.

Pos: 4.5 /BA/Sicher heit/Hi nweis_Diese Kurzanlei tung ersetzt nicht die Betriebsanl eitung @ 391\mod_1445864338940_78.docx @ 2801615 @ @ 1

This brief instruction does not replace the operating instructions. For further information, refer to

operating instructions of the machine.

Pos: 4.6 /Layout Modul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
1
2
3
4
5
...
»

Содержание Comprima CF



































Отзывы:

Нет отзывов