Krone Comprima CF Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 34

Krone Comprima CF Скачать руководство пользователя страница 26

Important Settings for Film Tying

26

Pos: 6.35.11 /Ü berschriften/Z wischenüberschriften/A-E/Abstreifschi ene ei nstellen @ 350\mod_1436860877767_78.docx @ 2629586 @ @ 1

Setting scraper rail

Pos: 6.35.12 /BA/Wartung/Rundballenpr esse/F olienbindung Wartung/Abstr eifschiene einstell en_Bil d @ 350\mod_1436520880946_78.docx @ 2627544 @ @ 1

COM00401

5

6

3

1

2

3

4

Fig. 26

Pos: 6.35.13 /BA/Wartung/Rundballenpr esse/F olienbindung WartungAbstrei fschiene ei nstellen_Text @ 350\mod_1436508693947_78.docx @ 2626973 @ @ 1

•

Mount scraper bar (1) centred in the oblong hole of housing side part and slightly tighten

the screw connection (6) at both external sides of the bale chamber.

•

Lay the scraper rail (3) up to the spiral roller (4).

•

Tighten screw connections (2) and threaded pins.

•

Drive clamping wedge (5) into place on both outer sides of the bale chamber and tighten

screw connection (6).

•

Turn machine manually and check whether the scraper rail (3) rests against the spiral

roller (4).

•

In case the scraper rail (3) does not rest against the spiral roller (4), loosen the screw

connection (6) on the clamping wedge (5).

•

Turn the clamping wedge (5) by 180° and tighten screw connection (6) again.

Pos: 6.35.14 /BA/Wartung/Rundballenpr esse/F olienbindung WartungAbstrei fschiene ei nstellen_Hinweis @ 350\mod_1436860619780_78.docx @ 2629551 @ @ 1

Note

It is possible to turn the clamping wedge by 180° as its dimensions from oblong hole to upper

and lower stop edge are different.

Pos: 6.35.15 /Ü berschriften/Z wischenüberschriften/A-E/Abstreifverstär ker ei nstellen und festzi ehen @ 351\mod_1436861197445_78.docx @ 2629655 @ @ 1

Setting and tightening scraper reinforcer

Pos: 6.35.16 /BA/Wartung/Rundballenpr esse/F olienbindung Wartung/Abstr eifverstär ker l ösen-festziehen_Foli enbindung _Bild @ 350\mod_1436509673712_78.docx @ 2627008 @ @ 1

COM00400

1

3

1

3

4

2

Fig. 27

Pos: 6.35.17 /BA/Wartung/Rundballenpr esse/F olienbindung Wartung/Abstr eifverstär ker festziehen_F olienbi ndung_T ext @ 351\mod_1436861454407_78.docx @ 2629686 @ @ 1

•

Place scraper reinforcer (3) on the spiral roller (4).

•

Tighten screw connections (2).

Pos: 6.36 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
24
25
26
27
28
...
»

Содержание Comprima CF



































Отзывы:

Нет отзывов