Krone Big M II, Руководство по эксплуатации

Страница: 113 / 156

XI - 5
Maintenance and Care
The cooling system is filled with a special coolant ex
works. This coolant protects against corrosion and
provides frost protection up to 37° C
The cooling system must be always
filled with John Deere COOL-GARD no
matter what the season. Change the
engine coolant every 3 years.
If there is no coolant available, depending on the season a
mixture of 50 % ethylene glycol antifreeze/anticorrosion
agent and 50 % clear, soft water must be used. This
mixture also provides corrosion and freezing protection up
to –37 ° C.
Cooling system density additives may
not be used.
BMII-182
1
2
3
11.11 Engine Coolant - Control
Never open the cap while the engine is
hot. Switch off the engine and wait until
the engine has cooled down.
Required quantity = 44 litres
11.10 Engine Coolant
Engine Coolant - Control:
• Check engine coolant level daily.
• The engine coolant level must be visible up to the
middle of the inspection window.
• If necessary, top up engine coolant
To do this:
• Turn the cap (2) to the first notch and wait until the
overpressure has been reduced.
• Fully open cap (3) and refill enginge coolant to the
middle of the inspection window.
• Close the caps (2) and (3).