Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Страница: 87 / 134

Maintenance 11
Maintenance table 11.1
Bellima F 130
Original Operating Instructions 150000148_06_en 87
11 Maintenance
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
„
To avoid accidents, the relevant safety instructions must be read and observed, refer to
page 13 .
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
„ The safety routines must be read and observed to avoid accidents, refer to page 24 .
11.1 Maintenance table
11.1.1 Maintenance – prior to the beginning of the season
Checking oil level
Main gearbox refer to page 98
Components
Set and oil the drive chains refer to page 106
Tighten screws/nuts on the machine refer to page 94
Retighten wheel nuts refer to page 98
Check tyre pressure refer to page 97
Vent friction clutch refer to page 99
Check the distance of the roller to the bale
formation conveyor chain, set if applicable refer to page 109
Clean the bushing and the drawbar eye refer to page 111
Prepare brake disc of the wrapping material
brake refer to page 47
Grease lubrication points according to lubrica-
tion chart refer to page 89
Check the hydraulic hoses for leaks and, if ne-
cessary, have them replaced by a KRONE
service partner.
Check electrical connection cables and road
travel lighting refer to page 77