Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Страница: 98 / 134

11 Maintenance
11.6 Servicing the main gearbox
98
Bellima F 130
Original Operating Instructions 150000148_06_en
Retighten wheel nuts
DVG000-002
„
Retighten the wheel nuts crosswise (as shown) with a torque wrench, tightening torque refer
to page 98 .
Maintanance intervals, refer to page 87 .
Tightening torque: Wheel nuts
Thread Width across
flats Amount of bolts
per hub Maximum tightening torque
black galvanised
M12 x 1.5 19 mm 4/5 units 95 Nm 95 Nm
M14 x 1.5 22 mm 5 units 125 Nm 125 Nm
M18 x 1.5 24 mm 6 units 290 Nm 320 Nm
M20 x 1.5 27 mm 8 units 380 Nm 420 Nm
M20 x 1.5 30 mm 8 units 380 Nm 420 Nm
M22 x 1.5 32 mm 8/10 units 510 Nm 560 Nm
M22 x 2 32 mm 10 units 460 Nm 505 Nm
11.6 Servicing the main gearbox
RP000-201
The main gearbox (3) is located in the front crossbeam (2) of the machine.
ü The machine is shut down and safeguarded, refer to page 24 .
„
Comply with the safety routine "Safe execution of oil level check, oil and filter element
exchange",
refer to page 25 .
„ Dismount the guard (1) behind the crossbeam (2).