Krone Bellima F 130, Оригинальная инструкция по эксплуатации

Страница: 97 / 134

Maintenance 11
Checking/maintaining tyres 11.5
Bellima F 130
Original Operating Instructions 150000148_06_en 97
Thread Locking screw and viewing glass with
copper ring*
)
Ventilation/breather filter made of
steel
Bleed valve made of brass
Ventilation and breather filter made of
brass
Steel and cast Aluminium Steel and cast Aluminium
Maximum tightening torque (Nm) (±10 %)
M10x1 8
M12 x 1.5 14
G1/4“ 14
M14 x 1.5 16
M16 x 1.5 45 40 24 24
M18 x 1.5 50 45 30 30
M20 x 1.5 32
G1/2“ 32
M22X1.5 35
M24x1.5 60
G3/4“ 60
M33x2 80
G1“ 80
M42x1.5 100
G1 1/4“ 100
*) Always replace copper rings
11.5 Checking/maintaining tyres
ü
The machine is shut down and safeguarded, refer to page 24 .
Inspect the tyres visually
„
Visually inspect tyres for cuts or breaks.
Æ
If there are cuts or breaks in the tyres, have the tyres repaired or replaced by a KRONE
service partner.
Maintenance intervals for visual inspection of the tyres, refer to page 87 .
Checking/adapting the tyre pressure
„
Check the tyre pressure, refer to page 39 .
Æ
If the tyre pressure is too high, deflate air.
Æ If the tyre pressure is too low, increase the tyre pressure.
Check the maintenance intervals for tyre pressure, refer to page 87 .