Krone ActiveMow R 200, Руководство по эксплуатации

Страница: 65 / 90

Maintenance - Gearbox 13
Main gearbox 13.2
ActiveMow R 200
Original Operating Instructions 150000521_04_en 65
Change oil
ü
A suitable container is available for escaping oil.
„ Unscrew the locking screw from the inspection hole (1) and the locking screw from the filling
hole (3).
„
Unscrew the oil drain plug (2) and drain the oil.
„ Screw in the oil drain plug (2), tightening torque refer to page 60 .
„
Refill with fresh oil up to the inspection hole (1) via the filling hole (3).
„
Screw the locking screw into the inspection hole (1) and the locking screw into the filling
hole (3), tightening torque
refer to page 60 .
13.2 Main gearbox
KMG000-073
„
Observe the safety routine “Safely performing oil level check, oil change and filter element
change”,
refer to page 25 .
INFORMATION
The oil level must be checked and the oil must be changed in working position and with
machine in horizontal position.
Check oil level
„
Unscrew the locking screw of the inspection hole (1).
ð
If the oil reaches up to the inspection hole (1):
„
Screw on the locking screw of the inspection hole (1), tightening torque refer to
page 60 .
ð
If the oil does not reach up to the inspection hole (1):
„ Remove the locking screw from the filling hole (3).
„
Refill with fresh oil up to the inspection hole (1) via the filling hole (3).
„ Screw on the locking screw of the inspection hole (1) and the locking screw of the filling
hole (3), tightening torque
refer to page 60 .