Krone ActiveMow R 200, Руководство по эксплуатации

Страница: 19 / 90

Safety 2
Basic safety instructions 2.3
ActiveMow R 200
Original Operating Instructions 150000521_04_en 19
Danger due to machine which is not prepared properly for road travel
If the machine is not prepared properly for road travel, serious accidents may occur on the
roads.
„ Before driving on roads, prepare the machine for road travel, refer to page 51 .
Danger when cornering with mounted machine
When cornering, the tractor with mounted machine has a larger swivelling range. This may
result in accidents.
„
Consider the larger swivel range.
„ Consider people, oncoming traffic and obstacles when turning.
Dangers when operating the machine on slopes
The machine may tilt when it is used on slopes. As a result, accidents may occur and people
may be seriously injured or killed.
„
Do not work and drive on a slope unless the ground of the slope is flat and the adhesion of
the tyres to the ground is ensured.
„ Turn the machine at low speed. Turn in a large arc.
„
Avoid driving across a slope because the centre of gravity of the machine will be changed
by payload and by executing machine functions.
„ Avoid abrupt steering movements on slopes.
„
Do not move the machine from working position to transport position or from transport
position to working position as long as the machine is used across a slope.
„ Do not park the machine on slopes.
„
Observe procedures for operating the machine on slopes, .
2.3.15 Parking the machine safely
An improperly parked machine may move uncontrollably or tip over. People may be injured or
killed.
„
Park the machine on a horizontal and level ground capable of bearing the load.
„ Before adjusting, repairing, servicing and cleaning the machine, ensure that it is securely
positioned.
„ Note section “Parking the Machine” in chapter Driving and Transport, refer to page 51 .
Unattended parking
Adults and especially children are at risk from an inadequately secured and unattended parked
machine.
„
Before parking it: Shut down and safeguard the machine, refer to page 24 .
2.3.16 Consumables
Unsuitable consumables
Consumables which do not comply with the requirements of the manufacturer may impair the
operational safety of the machine and cause accidents.
„ Use only consumables which comply with the requirements of the manufacturer.