KRONA KANDER KRMFR101, Руководство пользователя

Страница: 48 / 54

REFRIGERATORS
Installation and operation instructions
DEFROST FREEZER
WARNING: Under no circumstances
should sharp metal tools be used for this
operation, unless recommended by the
manufacturer, as they may damage the
refrigeration circuit.
If there is water on the bottom of the
freezer compartment, remove it with a
sponge.
As time passes, frost will form in certain
areas of the freezer compartment. Frost
accumulating in the freezer must be
removed periodically (use a plastic scraper if
available).
In order to maintain the performance of
the freezer, a complete defrosting is
necessary if the frost thickness exceeds 3-5
mm.
The day before defrosting, turn the
thermostat knob to position "5" to
completely freeze the food.
(recommendation).
• Clean the inside by hand with a solution of
warm water and a small amount of
detergent.
Do not use abrasive materials or
strong cleaning agents.
• During defrosting, frozen food should be
wrapped in several layers of paper and
stored in a cool place. The inevitable
increase in temperature will reduce their
shelf life. Remember to use these
products for a relatively short period of
time.
• Set the thermostat wheel to the “• ”
position and turn off the device.
• Leave the door open to speed up the
defrosting process. Remove melted water
from the chamber.
• Dry the inside of the device, plug it in and
turn the thermostat dial to position “5”.
After 24 hours, set the thermostat to the
desired position
10