KRONA KANDER KRMFR101, Руководство пользователя

Страница: 44 / 54

REFRIGERATORS
Installation and operation instructions
INSTALLATION AND OPERATION OF THE FREEZER
Before using the freezer, pay attention to
the following points:
• The operating voltage of the freezer is AC
220-240V at 50Hz.
• Ensure free access to the electrical outlet
after installing the appliance.
• When you turn on the freezer for the first
time, a peculiar smell may appear. Once
the cooling process starts, the smell will
disappear.
• Before connecting the power cable, make
sure that the voltage indicated on the
rating plate matches the voltage of your
home's electrical network.
• Insert the plug into a properly grounded
outlet. If the electrical outlet does not
have a ground terminal, or the plug is not
suitable for connecting to the outlet, we
recommend that you contact a qualified
electrician for assistance.
• The device must be connected to a mains
supply with a properly installed fused
socket. The power supply (AC) and the
voltage at the operating point must be
indicated on the nameplate of the
appliance (located on the left side inside
the freezer).
• We are not responsible for any damage
caused by using the freezer without an
earth connection.
• Place the refrigerator in a place that
prevents
direct sunlight.
• The freezer should under no circumstances
be used outdoors or left in the rain.
• The freezer must be at least 50 cm away
from stoves, ovens and heaters and at
least 5 cm away from electric ovens.
• When the refrigerator is next to the deep
freezer, the distance between them
should be at least 2 cm to prevent
condensation on the outside surface.
• Do not place heavy objects on the freezer.
• Thoroughly clean the device before use,
especially inside (see "Cleaning and
maintenance" section).
• For installation in a kitchen, see the
Installation section.
The product is intended for use only
when built in a kitchen that meets all
requirements.
• Wipe down all parts of the freezer before
using
6